TABLE OF CONTENTS


1 - Confirm you have everything

  • SymplyDIT LTO Desktop drive
  • 2m (Intel certified) Thunderbolt™️ 3 cable
  • Power cord

2 - Install Symply ATTO driver

Before powering on the system, ensure that none of the ventilation holes are blocked, that there are no obstructions around the system blocking air-flow, and that the environment is within the specified operating conditions and that acclimatization time has been allowed.

  1. Plugin the power cable, the supplied Thunderbolt cable and power on the SymplyPRO LTO Desktop
  2. Get the Windows SymplyDIT LTO Desktop installers from the [downloads page]
  3. Install the driver following the on-screen instructions provided by the installer
  4. Open the Thunderbolt Control Center and enable SymplyDIT LTO as a connected device
  5. Open the Device Manager
  6. Under the Other devices category you will see IBM ULTRIUM-XXX SCSI Sequential Device
    1. Right-click and select Update Driver
    2. Click Browse my computer for drivers
    3. Click Let me pick from a list of available drivers on my computer
    4. Select LTO Tape drive and click Next
    5. The Windows LTO driver will install

 


For Windows Server 2016 and 2019 you will need to download and install the IBM LTO Tape driver for the relevant version of Windows Server. These can be downloaded from the Symply support website. Follow the onscreen instructions in the installer.


3 - Windows Server:Install IBM LTO Tape driver

For Windows Server 2016 and 2019 you will need to download and install the IBM LTO Tape driver for the relevant version of Windows Server. These can be downloaded from [downloads page]. Follow the onscreen instructions in the installer.


If you have any questions please submit a [support ticket]