Information about the ATTO Xtend SAN iSCSI Initiator

Unlike Windows, macOS does not include built-in iSCSI Initiator capabilities, which is needed to communicate with the LTO tape drives (known as iSCSI targets) connected to the SymplyPRO Ethernet appliance.

Licensing

Symply recommend ATTO Xtend SAN for the iSCSI initiator. One (1) ATTO Xtend SAN license is included with every purchase of a SymplyPRO Ethernet, this license can be claimed by opening a support ticket and providing the serial number of the Symply product and proof of purchase. Additional licenses are available to purchase via the Symply or ATTO webstores, or via a Symply authorized reseller. 

Downloads

Download ATTO Xtend SAN Software

Watch the ATTO Xtend SAN Installation Procedure

Download ATTO Xtend SAN Manual

Notices

Administrator access is required to complete the installation.

NOTE: Apple Silicon and T2-based Intel Macs must have the Security Policy set to Reduced Security - instructions are available here: [Enable hardware driver support]

If you have any questions please submit a [support ticket]