Thank you for purchasing the SymplyPRO XTL 40    

The SymplyPRO XTL 40 is highly scalable 3U modular library for managing growing data sets. All the XTL 40 installations begin with the 3U Base Module, with capacity for 40 tape cartridges and 3 half-height LTO tape drives.   The tape drives can be either SAS or Fibre Channel (FC), or the XTL-40 can be installed with SymplyPRO XTL Ethernet Module(s) with dual 10Gb Ethernet (iSCSI) that converts up to 4 x SAS drives per Ethernet Module to iSCSI.  Each XTL Ethernet Module occupies a single LTO drive slot.

The XTL 40 is expandable, allowing a user to grow their tape storage capacity as their data requirements increase. As data storage needs grow, the XTL-40 can also grow by adding one or more 3U Expansion Modules.  Each Expansion Module provides an additional 40 tape cartridges and supports an additional 3 half-height LTO tape drives. Up to 15 Expansion Modules can be added to a Base Module, bring the total library capacity to 640 tape cartridges and 48 half-height LTO tape drives.  

This guide is intended for system installers who need physical and functional knowledge of installing the SymplyPRO XTL 40 3U Modular Library into a rack.

Support

If you have any support questions that are not addressed in this document, then please check our extensive [FAQs] or submit a [support ticket] on our support site or by emailing us directly at [support@gosymply.com].

Feedback

Your feedback is important to us, so please let us know what you think of our products via email [hello@gosymply.com].

If you have any questions please submit a [support ticket]