Thank you for purchasing the SymplyPRO XTL 80
SymplyPRO XTL-80 is a highly scalable, 6U modular tape library designed for enterprise datasets. Every deployment starts with the 6U Base Module, providing 80 cartridge slots and drive capacity for up to six half-height LTO drives (or three full-height LTO drive). Drives may be SAS or Fibre Channel (FC). Alternatively, the Base Module can host a SymplyPRO XTL Ethernet Module with dual 10 GbE (iSCSI) that bridges up to four SAS tape drives; the Ethernet Module occupies one drive bay.
Capacity and performance scale linearly with additional 6U Expansion Modules. Each Expansion Module adds 80 cartridge slots and supports up to six half-height LTO drives, or three full-height LTO drive. Up to 6 Expansion Modules can be attached to a single Base Module—for a maximum of 560 cartridges and 42 half-height (or 21 full-height) LTO drives.
For connectivity, SymplyPRO XTL presents a single target ID per drive with dual LUNs—LUN 0 for the tape drive and LUN 1 for the library robotics. Use an HBA/initiator that supports multiple LUNs (LUN scanning); if LUN scanning is disabled, the host will enumerate only LUN 0 and will see the drive but not the library.
SymplyPRO XTL-80 integrates with environments that support SAS, FC, iSCSI (via the XTL Ethernet Module), or Thunderbolt (via the XTL Thunderbolt Module). Full feature access requires either native OS support or a compatible backup/archive application.
About This Document
This guide is intended for system administrators who need hardware setup and basic configuration for the XTL 80. For further information please refer to the SymplyPRO XTL 80 user guide.
Support
If you have any support questions that are not addressed in this document, then please check our extensive [FAQs] or submit a [support ticket] on our support site or by emailing us directly at [support@gosymply.com].
Feedback
Your feedback is important to us, so please let us know what you think of our products via email [hello@gosymply.com].
Document Version
Title: SymplyPRO XTL 80 Quick Start Guide
Date: January 30th , 2026
Version: 1.1